Rocketry Planet

Attention Earthlings: The LOC/Precision mother ship is looking for a few good test pilots for an important mission.

Significant earth funds have been committed to this quest.

LOC/Precision's new Roland is pumping out alien delights.

Mission - Determine best decal application and delivery system for future LOC/Precision customers.

Cost to Test Pilot - Time and Information Reporting - email report back.

LOC/Precision needs your help as a concerned rocket pilot in determining the best use of a new Roland Versa Camm vinyl printer/cutter recently purchased to enhance the product appearance.  This machine prints in full color and cuts on a variety of materials (including decals and T shirt blanks).

LOC/Precision needs to develop a good application instruction set for each application, determine the value of each set, decide on the best delivery method and evaluate the desirability of the markings prior to releasing them for sale to the earthbound public.

ONE Test Pilot Opening for each of LOC/Precision's kit models is available.

Two sets of decals for each LOC/Precision model rocket type will be offered BY PRODUCT NUMBER on a first come, first served basis.  Once the PRODUCT NUMBER is assigned, no other pilot can attempt that mission. 

One decal set will be the basic decal as printed for peal and stick application, the other will have the non-printed portions removed (process called weeding) and a reverse release paper applied which can make certain decals much easier to place but adds cost.

You will need to install a set of decals on your model, fill out the short questioner and give us your opinions.  A picture of your finished rocket and any pictures of your application method is requested along with a signed (digitally is fine) model release for us to post them on the net. 

This mission applications will are available now for those wanting to apply.  Send in your mailing address and the model you wish to submit - a list of the models and their mission availability will be posted on the LOC/Precision website - missions start March 5, 2010 and will continue until all part numbers are completed. 

We look forward to your success should you be chosen for this mission.

Email mission requests to This email address is being protected from spam bots, you need Javascript enabled to view it .

Reader comments:

#1 Re: Article: LOC/Precision mother ship looking for a few good pilots

I'm requesting the Expediter!!

Wild Doogie on 02-24-2010 04:49 PM

#2 Re: Article: LOC/Precision mother ship looking for a few good pilots

Be sure to send the email!

"Email mission requests to This email address is being protected from spam bots, you need Javascript enabled to view it "

ddmobley on 02-24-2010 04:53 PM

#3 Re: Article: LOC/Precision mother ship looking for a few good pilots

Is this just for the decals to put on your own LOC kit? Because I have a loc legacy but it's nit picture worthy.

shadycuz on 02-24-2010 04:56 PM

#4 Re: Article: LOC/Precision mother ship looking for a few good pilots

"You will need to install a set of decals on your model."

I think you just get 2 decal sets, not the kit.

lkal32 on 02-24-2010 06:59 PM

#5 Re: Article: LOC/Precision mother ship looking for a few good pilots

Graduator taken...

Stealthfixr on 02-24-2010 07:18 PM

#6 Re: Article: LOC/Precision mother ship looking for a few good pilots

Quote:

Be sure to send the email!

"Email mission requests to This email address is being protected from spam bots, you need Javascript enabled to view it "

That was the first thing I did...include your mailing address and which rocket(s). I have the Expediter ready to build with G-10 fins. Also thinking of covering the body tubes with FG. Why not dual deploy??

I'm going for it Man!!

Wild Doogie on 02-24-2010 07:22 PM

#7 Re: Article: LOC/Precision mother ship looking for a few good pilots

Quote:

That was the first thing I did...include your mailing address and which rocket(s). I have the Expediter ready to build with G-10 fins. Also thinking of covering the body tubes with FG. Why not dual deploy??

I'm going for it Man!!

DD is completely doable on this... I did! Perfectflite MAWD.

bigone5500 on 02-24-2010 07:51 PM

#8 Re: Article: LOC/Precision mother ship looking for a few good pilots

This is a good reason to get a LOC Lil Nuke!

bigone5500 on 02-24-2010 07:54 PM

#9 Re: Article: LOC/Precision mother ship looking for a few good pilots

Buy LOC kits.

Just Jerry on 02-24-2010 09:52 PM

#10 Re: Article: LOC/Precision mother ship looking for a few good pilots

Quote:

Buy LOC kits.

Minie Magg - DONE (CAR L1,2,3)
LOC Nuke Pro-Max - DONE
Magnum -Purchased but not built yet
Aura - DONE
Hyper-LOC 835 + the Hypertek 835 motor - DONE
Mini LOC kits (the set) - Purchased but not built yet
I'm a bit of a bit of a LOC fan.
No, I am not a teenager. sad but true.

Anyway, I sent an email. We'll see.

LenB on 02-25-2010 01:05 AM

Comments 1-10 of 22 shown. Click here to read comments 11 through 22.

Registered users can add comments and discuss this article. To participate, please login or register.