|
Space Modeling Solutions offering IgniterMan products |
|
|
|
|
2000 Archived News by Space Modeling Solutions
|
|
Monday, January 31, 2000 |
|
GILBERT, Arizona USA — Ignitors are where your launch really begins. Even after you've put in the time and effort to carefully assemble your motor, wire the ejection charges, and pack the parachute you still need an ignitor to make that flight happen. You want that bird to leap off the pad the first time you press that button. Why take chances with a cheap or unreliable ignitor?
Now you can be in complete control with the IgniterMan Igniter Construction kit from Unique Rocketry. This is the exciting 'strip-and-dip' kit that you may have heard of. You can make lots of hot burning, safe, and reliable ignitors for a fraction of the cost of manufactured ignitors or even other kits. Hard to start, large, or clustered motors are all easy to start with the IgniterMan ignitors you dip yourself. Just look at some of these great features:
IgniterMan Igniter Kit Features: - Replaces winding and soldering bridge wires
- No soldering required
- Easy to use ... strip and dip your wires
- Inexpensive ... make igniters for less than $0.25 (#22 wire)
- Recycle old igniter leads ... cut-off burnt insulation, strip, and dip
- Acetone-based for quick drying time
- Non-inductive - less suseptible to stray RF signals
- Igniter resistance typically 4 to 10 ohms
- Compatible with existing 12 VDC launch systems
These kits can even be shipped at minimal cost without HAZMAT fees. Start that motor right the first time with ignitors you make yourself with the IgniterMan Igniter Construction Kit!
-##-
For further information:
Space Modeling Solutions
Peter Riddell, Proprietor
Voice: (480) 497-1960
Short e-mail messages:
This email address is being protected from spam bots, you need Javascript enabled to view it
(add return e-mail to message for reply)
http://pages.prodigy.net/riddell/smshome.html |
