ARVADA, Colorado USA — Missile Works Corporation announces the release of the PET² (Programmable Event Timer). The PET² has gone through extensive flight testing and is now ready for shipment. The PET² is the most advanced, feature-packed two-event timer available for HPR. It is an extremely versatile platform suitable for numerous rocketry applications that includes staging, air starts, recovery, photography, or signaling controls.

The unit features 2 completely independent programmable timers, each capable of 4 triggering modes (G-switch close, G-switch open, Pull-pin, or G-Switch/Pull-pin tandem) and 2 modes of operation (single event for pyro charges, repeated event for cameras or signal devices).

Each timer has 2 timing ranges. Low range is 0.5 to 8 seconds in 0.5-second increments, and high range is 2 to 32 seconds in 2-second increments. The unit also features audible pre-flight continuity status, audible pull-pin fault alarm, audible post flight continuity, and an audible input test mode to verify DIP switch programming operation.

The PET² User Manual is now available online for download and review, as well AVI clips and in-flight data capture results.

Missile Works Corporation made two successful demonstration flights of the PET² at the recent Springfest 2001 launch.

There are several other new products available as well, including the newly redesigned Digi-Fire Wireless Launch Control System, new motor liner and casting tube tandems, a host of new and innovative parts and supplies, and a new FreeWare and Apparel section.

Check out all the details of the new PET² and other new product offerings their our newly updated website at http://www.missileworks.com

Missile Works Corporation
P.O. Box 740714
Arvada CO, 80003
Tel:303.426.1462
Fax:303.426.1428