YORBA LINDA, California USA -- Now Hybrids is offering a starter hybrid motor special through February 15th. You can get the HyperTEK® 300cc motor system for $99.95 delivered to your door!

The 300cc motor system includes one standard grain, the .098 and .125 orifices to change the thrust profile, o-rings, tie wraps and lube--everything you need to fly it from your club’s HyperTEK Ground Support Equipment.

The motor can be flown twice with the standard grain, producing about 130N or 220N average thrust depending on orifice, with a total impulse of about 500NS. Additional reloads can be purchased for $26, giving you a cost per flight of about $13 plus a dollar or two for nitrous oxide. It can also fly on the Special Effects (EFX) reload.

The HyperTEK 54mm systems are modular. The 300cc tank can be unscrewed from the injector bell, and replaced with a 440cc tank, converting the motor to a small J. If the 835cc tank is added, you can even fly it as the K-240.

Most airframes with 54mm motor mounts can accept the 20.5 inch long motor assembly and only require the drilling of a small vent hole.

This offer applies to shipments to US addresses only, and California orders must add sales tax.

See http://www.nowhybrids.com for additional information, or email wayne@nowhybrids.

HyperTEK is a registered trademark of Cesaroni Technology Incorporated of Canada.